diff --git a/ESPCams3.yaml b/ESPCams3.yaml
new file mode 100644
index 0000000..fdb2b16
--- /dev/null
+++ b/ESPCams3.yaml
@@ -0,0 +1,50 @@
+esphome:
+  name: esphome-web-1a2b3c
+  friendly_name: ESP32 S3 Cam 1a2b3c
+  min_version: 2024.12.0
+  name_add_mac_suffix: False # this appends to 'name' NOT 'friendly_name'
+  # arduino.memory.type was key to getting PSRAM working for this board
+  platformio_options:
+    board_build.arduino.memory_type: qio_opi
+
+esp32:
+  board: esp32-s3-devkitc-1
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "YHh2xV5TZOhM5ToAwACH18N+xA3JbkYs4D0piI123UI="
+
+ota:
+  - platform: esphome
+    password: "e64a21890e78031eddf10ce24fbc7247"
+
+# Add the credentials to connect to your wifi network
+wifi:
+  id: wifi_component
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+# setup the esp32_camera components initial parameters
+# make sure to use the correct GPIO pins for your particular ESP32 model
+esp32_camera:
+  id: espcam
+  name: esp32-s3-cam
+  external_clock:
+    pin: GPIO15
+    frequency: 20MHz
+  i2c_pins:
+    sda: GPIO4
+    scl: GPIO5
+  data_pins: [GPIO11, GPIO9, GPIO8, GPIO10, GPIO12, GPIO18, GPIO17, GPIO16]
+  vsync_pin: GPIO6
+  href_pin: GPIO7
+  pixel_clock_pin: GPIO13
+  #reset_pin: no value for my card
+  #power_pin: no value for my card
+  # Image Settings
\ No newline at end of file