Victron-Blue.yaml hinzugefügt

Victron-Blue.yaml

@@ -0,0 +1,268 @@
+substitutions:
+  external_components_source: github://KinDR007/VictronMPPT-ESPHOME@main
+  lower_devicename: "victron-blue"
+  devicename: "BlueSolar_75_10"
+  config_version: "v2023.12.30"
+  wifi_fast_connect: "false"
+  accuracy: "2"
+
+esphome:
+  name: "${lower_devicename}"
+#  platform: ESP8266
+esp8266:
+  board: d1_mini
+  # board: nodemcuv2
+
+external_components:
+  - source: ${external_components_source}
+    refresh: 0s
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  power_save_mode: none
+  fast_connect: $wifi_fast_connect
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "${devicename} Hotspot"
+    password: Andra1977
+
+captive_portal:
+logger:
+  baud_rate: 0
+  # level: VERY_VERBOSE
+  esp8266_store_log_strings_in_flash: false
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "ck+V6y6vOpR9ty6rMXshGFb4L/15rPM+P34D6yBbV/s="
+  #reboot_timeout: 0s
+
+ota:
+  - platform: esphome
+    password: "0dd572e476ee28d45e11707f63b4c8a3"
+
+web_server:
+  port: 80
+
+time:
+  - platform: homeassistant
+
+uart:
+  id: uart_bus
+  tx_pin: D8  # Not connected! The communication is read-only
+  rx_pin: D7  # Connect this this GPIO and GND to the MPPT charger
+  baud_rate: 19200
+  stop_bits: 1
+  data_bits: 8
+  parity: NONE
+  rx_buffer_size: 256
+
+victron:
+  id: victron0
+  uart_id: uart_bus
+  throttle: 10s
+
+sensor:
+  - platform: victron
+    victron_id: victron0
+    panel_voltage:
+      name: "Panel voltage"
+      id: pv
+    battery_voltage:
+      name: "Battery voltage"
+      id: bv
+#    battery_current:
+#      name: "Battery current"
+#      id: bc
+    load_current:
+      name: "Load current"
+      id: load_current
+    max_power_yesterday:
+      name: "Max power yesterday"
+      id: max_power_yesterday
+    max_power_today:
+      name: "Max power today"
+      id: max_power_today
+      accuracy_decimals: ${accuracy}
+#    yield_total:
+#      name: "Yield total"
+#      id: yield_total
+#      filters:
+#        # Multiplication factor from W to kW is 0.001
+#        - multiply: 0.001
+#      unit_of_measurement: kWh
+#      accuracy_decimals: ${accuracy}
+#    yield_yesterday:
+#      name: "Yield yesterday"
+#      id: yield_yesterday
+#      filters:
+#        # Multiplication factor from W to kW is 0.001
+#        - multiply: 0.001
+#      unit_of_measurement: kWh
+#      accuracy_decimals: ${accuracy}
+    yield_today:
+      name: "Yield today"
+      id: yt
+      filters:
+        # Multiplication factor from W to kW is 0.001
+        - multiply: 0.001
+      unit_of_measurement: kWh
+      accuracy_decimals: ${accuracy}
+    panel_power:
+      name: "Panel power"
+      id: panel_power
+#    day_number:
+#      name: "Day sequence number"
+#      id: day_number
+#      icon: "mdi:calendar-today"
+#    charging_mode_id:
+#      name: "Charger mode id"
+    error_code:
+      name: "Error code"
+    tracking_mode_id:
+      name: "Tracker mode id"
+
+#  - platform: wifi_signal
+#    name: "${devicename} WiFi Signal Sensor"
+#    id: rssi_sensor
+#    update_interval: 15s
+
+#  - platform: template
+#    name: "Wifi Quality"
+#    unit_of_measurement: "%"
+#    accuracy_decimals: 0
+#    icon: "mdi:wifi"
+#    update_interval: 15s
+#    lambda: |-
+#        int quality;
+#        const int rssi = id(rssi_sensor).state;
+#        if (rssi <= -100) {
+#          quality = 0;
+#        } else if (rssi >= -50) {
+#          quality = 100;
+#        } else {
+#          quality = 2 * (rssi + 100);
+#        }
+#        return quality;
+
+  - platform: uptime
+    name: "${devicename} Uptime"
+    id: uptime_s
+    update_interval: 5s
+
+ # - platform: template  # for 1 cell of battery
+ #   name: "Bat S1 "     # 6S pack
+ #   lambda: |-
+ #     if ((((id(bv).state) / 6) > 4.22) && (((id(bv).state) / 6) < 3.0)) {
+ #       return NAN;
+ #     }
+ #     return ((id(bv).state) / 6);
+
+ #   update_interval: 10s
+ #   icon: "mdi:battery"
+ #   unit_of_measurement: V
+ #   device_class: "voltage"
+ #   accuracy_decimals: ${accuracy}
+ # - platform: template           # Battery working percent
+ #   name: "Bat working percent"  # cycle batt between 3,0v - 4.01v
+ #   lambda: |-
+ #     if (((((((((id(bv).state) / 7 )) - 3.142) / (4.01142 - 3.142)) * 100)) >= 115) && ((((((((id(bv).state) / 7 )) - 3.142) / (4.01142 - 3.142)) * 100)) <= -25)) {
+ #       return NAN;
+ #     }
+ #     return ((((((id(bv).state) / 7 )) - 3.142) / (4.01142 - 3.142)  ) * 100);
+
+#    update_interval: 15s
+ #   icon: "mdi:battery"
+ #   unit_of_measurement: "%"
+ #   device_class: "voltage"
+ #   accuracy_decimals: ${accuracy}
+
+ # - platform: template   # FVE percent
+ #   name: "FVE percent"  # 500Wp max power of my FVE grid
+ #   lambda: |-
+ #       if (((((id(panel_power).state) / 500) * 100) >= 120) && ((((id(panel_power).state) / 500) * 100) < 0)) {
+ #         return NAN;
+ #       }
+ #       return (((id(panel_power).state) / 500) * 100);
+ #   icon: "mdi:gauge"
+ #   unit_of_measurement: "%"
+ #   device_class: "power"
+ #   accuracy_decimals: ${accuracy}
+ #   update_interval: 15s
+
+ # - platform: template   # median generated day energy
+ #   name: "Day median generated "  # 500Wp max power of my FVE grid
+ #   lambda: |-
+ #       return (id(yield_total).state) / (id(day_number).state);
+ #   update_interval: 15s
+ #   icon: "mdi:gauge"
+ #   unit_of_measurement: "kWh"
+ #   device_class: "power"
+ #   accuracy_decimals: 3
+
+text_sensor:
+  - platform: victron
+    victron_id: victron0
+    charging_mode:
+      name: "Charging Mode"
+    error:
+      name: "Error"
+    tracking_mode:
+      name: "Tracking Mode"
+    firmware_version:
+      name: "Firmware Version"
+    device_type:
+      name: "Device Type"
+
+ # - platform: template
+ #   name: "${devicename} Config Version"
+ #   icon: mdi:information-outline
+ #   lambda: |-
+ #     return {"${config_version}"};
+ # - platform: version
+ #   name: "${devicename} Esphome Version"
+ #   icon: mdi:information-outline
+ #  - platform: wifi_info
+ #   ip_address:
+ #     name: "${devicename} IP Address"
+ #     icon: mdi:ip
+ #   ssid:
+ #     name: "${devicename} Connected SSID"
+ #     icon: mdi:wifi
+ #   bssid:
+ #     name: "${devicename} Connected BSSID"
+ #   mac_address:
+ #     name: "${devicename} Mac Wifi Address"
+  - platform: template
+    name: "${devicename} Uptime (formatted)"
+    lambda: |-
+      uint32_t dur = id(uptime_s).state;
+      int dys = 0;
+      int hrs = 0;
+      int mnts = 0;
+      if (dur > 86399) {
+        dys = trunc(dur / 86400);
+        dur = dur - (dys * 86400);
+      }
+      if (dur > 3599) {
+        hrs = trunc(dur / 3600);
+        dur = dur - (hrs * 3600);
+      }
+      if (dur > 59) {
+        mnts = trunc(dur / 60);
+        dur = dur - (mnts * 60);
+      }
+      char buffer[17];
+      sprintf(buffer, "%ud %02uh %02um %02us", dys, hrs, mnts, dur);
+      return {buffer};
+    icon: mdi:clock-start
+    update_interval: 5s
+
+switch:
+  - platform: restart
+    icon: mdi:reload-alert
+    name: "${devicename} Restart"
+