esphome:
  name: esphome-web-1a2b3c
  friendly_name: ESP32 S3 Cam 1a2b3c
  min_version: 2024.12.0
  name_add_mac_suffix: False # this appends to 'name' NOT 'friendly_name'
  # arduino.memory.type was key to getting PSRAM working for this board
  platformio_options:
    board_build.arduino.memory_type: qio_opi

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "YHh2xV5TZOhM5ToAwACH18N+xA3JbkYs4D0piI123UI="

ota:
  - platform: esphome
    password: "e64a21890e78031eddf10ce24fbc7247"

# Add the credentials to connect to your wifi network
wifi:
  id: wifi_component
  ssid: !secret wifi_ssid
  password: !secret wifi_password

# setup the esp32_camera components initial parameters
# make sure to use the correct GPIO pins for your particular ESP32 model
esp32_camera:
  id: espcam
  name: esp32-s3-cam
  external_clock:
    pin: GPIO15
    frequency: 20MHz
  i2c_pins:
    sda: GPIO4
    scl: GPIO5
  data_pins: [GPIO11, GPIO9, GPIO8, GPIO10, GPIO12, GPIO18, GPIO17, GPIO16]
  vsync_pin: GPIO6
  href_pin: GPIO7
  pixel_clock_pin: GPIO13
  #reset_pin: no value for my card
  #power_pin: no value for my card
  # Image Settings