substitutions:
  external_components_source: github://KinDR007/VictronMPPT-ESPHOME@main
  lower_devicename: "victron-blue"
  devicename: "BlueSolar_75_10"
  config_version: "v2023.12.30"
  wifi_fast_connect: "false"
  accuracy: "2"

esphome:
  name: "${lower_devicename}"
#  platform: ESP8266
esp8266:
  board: d1_mini
  # board: nodemcuv2

external_components:
  - source: ${external_components_source}
    refresh: 0s

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  power_save_mode: none
  fast_connect: $wifi_fast_connect

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "${devicename} Hotspot"
    password: Andra1977

captive_portal:
logger:
  baud_rate: 0
  # level: VERY_VERBOSE
  esp8266_store_log_strings_in_flash: false

# Enable Home Assistant API
api:
  encryption:
    key: "ck+V6y6vOpR9ty6rMXshGFb4L/15rPM+P34D6yBbV/s="
  #reboot_timeout: 0s

ota:
  - platform: esphome
    password: "0dd572e476ee28d45e11707f63b4c8a3"

web_server:
  port: 80

time:
  - platform: homeassistant

uart:
  id: uart_bus
  tx_pin: D8  # Not connected! The communication is read-only
  rx_pin: D7  # Connect this this GPIO and GND to the MPPT charger
  baud_rate: 19200
  stop_bits: 1
  data_bits: 8
  parity: NONE
  rx_buffer_size: 256

victron:
  id: victron0
  uart_id: uart_bus
  throttle: 10s

sensor:
  - platform: victron
    victron_id: victron0
    panel_voltage:
      name: "Panel voltage"
      id: pv
    battery_voltage:
      name: "Battery voltage"
      id: bv
#    battery_current:
#      name: "Battery current"
#      id: bc
    load_current:
      name: "Load current"
      id: load_current
    max_power_yesterday:
      name: "Max power yesterday"
      id: max_power_yesterday
    max_power_today:
      name: "Max power today"
      id: max_power_today
      accuracy_decimals: ${accuracy}
#    yield_total:
#      name: "Yield total"
#      id: yield_total
#      filters:
#        # Multiplication factor from W to kW is 0.001
#        - multiply: 0.001
#      unit_of_measurement: kWh
#      accuracy_decimals: ${accuracy}
#    yield_yesterday:
#      name: "Yield yesterday"
#      id: yield_yesterday
#      filters:
#        # Multiplication factor from W to kW is 0.001
#        - multiply: 0.001
#      unit_of_measurement: kWh
#      accuracy_decimals: ${accuracy}
    yield_today:
      name: "Yield today"
      id: yt
      filters:
        # Multiplication factor from W to kW is 0.001
        - multiply: 0.001
      unit_of_measurement: kWh
      accuracy_decimals: ${accuracy}
    panel_power:
      name: "Panel power"
      id: panel_power
#    day_number:
#      name: "Day sequence number"
#      id: day_number
#      icon: "mdi:calendar-today"
#    charging_mode_id:
#      name: "Charger mode id"
    error_code:
      name: "Error code"
    tracking_mode_id:
      name: "Tracker mode id"

#  - platform: wifi_signal
#    name: "${devicename} WiFi Signal Sensor"
#    id: rssi_sensor
#    update_interval: 15s

#  - platform: template
#    name: "Wifi Quality"
#    unit_of_measurement: "%"
#    accuracy_decimals: 0
#    icon: "mdi:wifi"
#    update_interval: 15s
#    lambda: |-
#        int quality;
#        const int rssi = id(rssi_sensor).state;
#        if (rssi <= -100) {
#          quality = 0;
#        } else if (rssi >= -50) {
#          quality = 100;
#        } else {
#          quality = 2 * (rssi + 100);
#        }
#        return quality;

  - platform: uptime
    name: "${devicename} Uptime"
    id: uptime_s
    update_interval: 5s

 # - platform: template  # for 1 cell of battery
 #   name: "Bat S1 "     # 6S pack
 #   lambda: |-
 #     if ((((id(bv).state) / 6) > 4.22) && (((id(bv).state) / 6) < 3.0)) {
 #       return NAN;
 #     }
 #     return ((id(bv).state) / 6);

 #   update_interval: 10s
 #   icon: "mdi:battery"
 #   unit_of_measurement: V
 #   device_class: "voltage"
 #   accuracy_decimals: ${accuracy}
 # - platform: template           # Battery working percent
 #   name: "Bat working percent"  # cycle batt between 3,0v - 4.01v
 #   lambda: |-
 #     if (((((((((id(bv).state) / 7 )) - 3.142) / (4.01142 - 3.142)) * 100)) >= 115) && ((((((((id(bv).state) / 7 )) - 3.142) / (4.01142 - 3.142)) * 100)) <= -25)) {
 #       return NAN;
 #     }
 #     return ((((((id(bv).state) / 7 )) - 3.142) / (4.01142 - 3.142)  ) * 100);

#    update_interval: 15s
 #   icon: "mdi:battery"
 #   unit_of_measurement: "%"
 #   device_class: "voltage"
 #   accuracy_decimals: ${accuracy}

 # - platform: template   # FVE percent
 #   name: "FVE percent"  # 500Wp max power of my FVE grid
 #   lambda: |-
 #       if (((((id(panel_power).state) / 500) * 100) >= 120) && ((((id(panel_power).state) / 500) * 100) < 0)) {
 #         return NAN;
 #       }
 #       return (((id(panel_power).state) / 500) * 100);
 #   icon: "mdi:gauge"
 #   unit_of_measurement: "%"
 #   device_class: "power"
 #   accuracy_decimals: ${accuracy}
 #   update_interval: 15s

 # - platform: template   # median generated day energy
 #   name: "Day median generated "  # 500Wp max power of my FVE grid
 #   lambda: |-
 #       return (id(yield_total).state) / (id(day_number).state);
 #   update_interval: 15s
 #   icon: "mdi:gauge"
 #   unit_of_measurement: "kWh"
 #   device_class: "power"
 #   accuracy_decimals: 3

text_sensor:
  - platform: victron
    victron_id: victron0
    charging_mode:
      name: "Charging Mode"
    error:
      name: "Error"
    tracking_mode:
      name: "Tracking Mode"
    firmware_version:
      name: "Firmware Version"
    device_type:
      name: "Device Type"

 # - platform: template
 #   name: "${devicename} Config Version"
 #   icon: mdi:information-outline
 #   lambda: |-
 #     return {"${config_version}"};
 # - platform: version
 #   name: "${devicename} Esphome Version"
 #   icon: mdi:information-outline
 #  - platform: wifi_info
 #   ip_address:
 #     name: "${devicename} IP Address"
 #     icon: mdi:ip
 #   ssid:
 #     name: "${devicename} Connected SSID"
 #     icon: mdi:wifi
 #   bssid:
 #     name: "${devicename} Connected BSSID"
 #   mac_address:
 #     name: "${devicename} Mac Wifi Address"
  - platform: template
    name: "${devicename} Uptime (formatted)"
    lambda: |-
      uint32_t dur = id(uptime_s).state;
      int dys = 0;
      int hrs = 0;
      int mnts = 0;
      if (dur > 86399) {
        dys = trunc(dur / 86400);
        dur = dur - (dys * 86400);
      }
      if (dur > 3599) {
        hrs = trunc(dur / 3600);
        dur = dur - (hrs * 3600);
      }
      if (dur > 59) {
        mnts = trunc(dur / 60);
        dur = dur - (mnts * 60);
      }
      char buffer[17];
      sprintf(buffer, "%ud %02uh %02um %02us", dys, hrs, mnts, dur);
      return {buffer};
    icon: mdi:clock-start
    update_interval: 5s

switch:
  - platform: restart
    icon: mdi:reload-alert
    name: "${devicename} Restart"